Knockdown ceilings

For my ceilings I dont use any type of special bag mix.
Just regular CGC Machine Mud. I use Machine Mud for absolutely everything. Tape, Beads, Fill, Skim, Designs. You name it, Machine Mud!

Here's some pics of a house I did last week.

 

I use Fastex or Hamilton's Ready Spray for everything but skip trowel. I really like the way Beadex Light Taping mud throws a skip, but you have to be uber-careful when sanding it if you choose to do so.

 

I use Fastex or Hamilton's Ready Spray for everything but skip trowel. I really like the way Beadex Light Taping mud throws a skip, but you have to be uber-careful when sanding it if you choose to do so.

we also use Hamilton redy and fastex,havnt seen fastex for a while is it still around?Tapin mud for a skip:blink: never would think to try but I bet it works fine. That beadex tapin is pretty good tapin mud. I know you dont try to spray it though

 

Litex commerical texture.

 

I use bagged , spray texture. mix myself with a drill, or in my rig (that i bought for only $500 what a steel) USG is my fav. brand.

 

Bagged wall and ceiling spray!:thumbup:

 

we used to mix about 3 bags of spray mud per mid size steel garbage can... quite a bit of water dont know exactly,. The smaller steel cans work better beings you have to lift them.Dont mix it xtra soupy until spray day. We would mix cans day or 2 b4 to let mud breakdown,,like I said a lil heavier mix 1rst go around. Soup it up where u want it the day u spray.

 

Nice work for knockdown:whistling2: not a big fan of it but that looked good:thumbsup: I like how you seperated from ceiling in kitchen

 

Thanks bro.

 

It is funny but in Minnesota there is none of any that products:blink: I use regular mud for most of my ceiling knockdown spray (cheap way) but for fog powder ceiling spray must be better (not too good for sanding).
http://1drywall.com/textures.html

 

It is funny but in Minnesota there is none of any that products:blink: I use regular mud for most of my ceiling spray (cheap way) but for fog powder ceiling spray must be better (not too good for sanding).
http://1drywall.com/services.htm

So it's a Minnesota thing then :whistling2:

In a older thread, Silver stilts questioned why we would paint then spray our ceilings. And I was trying to explain that we have pre-mixed mud that is specially made to do knock down, and I don't think he believed me :blink:

Turns out, it's just a Minnesota thing.

Now it's my turn to be in silvers sites

 

Usg all purpose.

 

If you know a supplier that handles USG or Goldbond(national gypsum),,, they have, OR ,can get bag texture.:yes:

 

So what is the best bag mud for texture specifically knockdown?

 

there used to be a bag mud called for kd. I believe it was usg. We switched to box spray mud and never looked back at the bag stuff. Dont spray any kd unless pathing into existing. Fastex and readyspray in 50lb box is so much easier to work with IMO

 

any compound that is pre mixed has stablizers that burn my eyes when sprayed.

 

spray prices: If there is enough footage i charge a drywall contractor as low as 2 cents per foot. General contractors i charge more. If i have to wait for my money it costs more. If the job is to small i have a 150$ minimum. Unless its a remodle i charge based on how much masking. You can kill a lot of time masking a skylite. cabnets floors, If i work for a piggy contractor who didnt cover anything first, I charge alot to clean then mask. Sometimes i just leave.

 

Canadian powder mix

Up here we have a product called Kal-Tex which is a Synko product. Synko is CGC (Canadian Gypsum Company) and I believe a subsidiary of USG. It is likely similar to or the same as your USG product line. It also needs to be mixed and soaked for some time before using but it works well. :thumbsup: Ceilings get a coat of primer first.

 

what kind of mud do you guys use for a stomp texture

 

USG advance formula.

 

here is my problem with spraying any premixed mud. It burns the hell out of my eyes. Whatever they use to keep the mud from seperating in the bucket. All premixed mud has it, Seems to burn . So i use powdered mud. cheaper too.

 

For my ceilings I dont use any type of special bag mix.
Just regular CGC Machine Mud. I use Machine Mud for absolutely everything. Tape, Beads, Fill, Skim, Designs. You name it, Machine Mud!

Here's some pics of a house I did last week.

Awesome stuff man!!