Drywall Talk - Professional Drywall and Finishing Contractors Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Thanks all for the tips...I really would like to use some sort of an iron post drilled and bolted to the floor however. Just not sure where/how to purchase/install them. One idea someone gave me is to construct a vertical box beam at the end of the wall, drill a hole into the concrete and install a piece of rebar down the center and fill with concrete. Sounds pretty labour intensive but I think so far it's the best solution.
HAVE YOUR WELDER MAKE 4 TO 5 FOOT EL BRACES OUT OF 1/4 INCH X 3-1/2 INCH ANGLE IRON AND USE 1/2 INCH EXPANSION BOLTS INTO CONCRETE EVERY 5 FEET . uSE DEEP LEG BOTTOM TRACK AND HORIZONTAL 1/2 INCH PLYWOOD UNDER ROCK WALL BE STIFFEN QUITE NICELY
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top