Drywall Talk - Professional Drywall and Finishing Contractors Forum banner
1 - 5 of 5 Posts

·
Vendor
Corner Bead Expert
Joined
·
4 Posts
Discussion Starter · #1 ·
We have been installing corner bead in Vancouver for the past 25 years. From high end housing , High Rise , Wood frame multi family , and commercial applications. We are interested in sharing our expertise ,on this topic.
From speeding up your process , to making a proper layout plan . Advising on the best application system we have proven results.
 

·
Vendor
Corner Bead Expert
Joined
·
4 Posts
Discussion Starter · #3 ·
The Universal roller we have designed works with all widths of Bead on the market, also works on Vinyl Bead NoCoat and Aqua Bead. With the tools we have designed , it can increase production immensely, with less physical stress on your body. The roller tool is designed with thoughts about saving shoulder stress, as the alloy wheels add the weight needed to set the bead with ease, (unlike plastic wheel conventional light rollers requiring you push hard on the roller to set and adhere the paper to the corners). The cushion on our roller wheels helps adhere the paper to the corners, much better . We have done complete hi rise buildings with no bubbles at all. The Pole sponge easily cleans the excess mud off of the bead leaving a totally clean , ready to fill bead, also saving time running up ladders.
Laying out prepping for install is depending on the type of site you are working on, the basic cutting the bead to fit precisely, placing outside each room, quickly running through the bead box . As its being put up with mud on the bead, it should be rolled soon after not allowing the mud to setup at all. Pro Bead Inc is our site showing the tools in use.
 
1 - 5 of 5 Posts
Top