Drywall Talk - Professional Drywall and Finishing Contractors Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
The ceiling metal mesh and what looks to be plaster, a thick plaster. I'm going to replace when I tore out with sheetrock oh, that'll still leave a nice Gap to fill in. I never work with mesh and plaster before let alone ever seen it installed on a ceiling. I'm at a standstill with how to approach this obstacle. Any suggestions are welcome, thanks in advance.https://photos.app.goo.gl/kwa1ubFDM95dbMX87
 

· Registered
Joined
·
2 Posts
I have never worked with plaster either and can't give you good advice in this case. It would be wiser to just hire a specialist for the job. It will be much faster and without unnecessary hassle. Recently, I also had a renovation at home, and I updated all the electrics and, at the same time, changed ordinary light bulbs to smart bulbs. I didn't even try to do it myself because I didn't understand anything in electrics. It's not that hard to change a light bulb. I do it. However, when more serious problems arise, such as changing wires, I immediately call a specialist. This is much smarter than trying to do it yourself without the necessary knowledge.
 

· Registered
Joined
·
9 Posts
I have never worked with plaster either and can't give you good advice in this case. It would be wiser to just hire a specialist for the job. It will be much faster and without unnecessary hassle. Recently, I also had a renovation at home, and I updated all the electrics and, at the same time, changed ordinary light bulbs to smart bulbs. I didn't even try to do it myself because I didn't understand anything in electrics. It's not that hard to change a light bulb. I do it. However, when more serious problems arise, such as changing wires, I immediately call a specialist. This is much smarter than trying to do it yourself without the necessary knowledge.
I renovated the kitchen a few years ago and installed drywall on the ceiling and arranged decorative lighting with neon lamps. I believe that now it needs to be refreshed or replaced. Do you think, how much this job will cost?
 
1 - 4 of 4 Posts
Top