Drywall Talk - Professional Drywall and Finishing Contractors Forum banner

spray rig

  1. General Drywall Discussion
    Planning on buying a Graco RTX 900 for small jobs like patching ceilings and walls. Want to get something some what big just to be safe. Are they any good? www.stevesonsiteservices.com
  2. Drywall Texturing
    Hey Guys / another New guy here with a question I have an older Spray Force 350 . The unit has been like Gold for Many Years ( '90 ) But now I'am getting a small constant drip of Mud out of the Back of the pump ( Motor side ) when running Near the chain coupling How hard is this to fix ?????
  3. Drywall Texturing
    I use a binks 7d with a 57 or 58 fluid nozzle depending on my mood. I usually get my orange peel tips from spray connection or order from sarasota. I have finally recently relized that sometimes when my orange peel is comming out to the side, it isnt always a tip gone bad but it can be a bad...
  4. Drywall Texturing
    After cleaning up your machine, do you leave a little bit of water in the stator/tube area?
  5. Drywall Texturing
    My rtx 1500 has very low air pressure even after putting a compresser repair kit in Any ideas?
  6. Drywall Texturing
    I'm looking at a like new(less than 200hrs) spray rig for sale . It's a Xlent Viper 220 texture spray rig. Can anybody give me any info or personal experience with this brand? Thank in advance for your input
  7. Drywall Texturing
    I need small texture sprayer for mostly small job not sure which one is good for that. The problem is i have to match texture in my job and i need really good sprayer where i can adjust things to match existing ceilings. So i am just interesting if someone can suggest me what brand to buy and...
  8. Drywall Texturing
    I am looking to build a texture rig. Nothing huge but big enough to do a good size house. Any ideas on what to get? Has anyone done it before? I just dont know were to begin!!!
  9. Drywall Tools, Supplies and Equipment
    I recentley purchased a used rtx 1500 sprayer and it has a 50' hose on it. I had to texture a 30X22 garage so I took 25' of hose off of it and when I started spraying I had to hold the gun in a bucket every time i stopped spraying for around 10 seconds before I could start again. It acts like...
  10. Drywall Texturing
    Has anyone used the marshalltown enforcer spray setup? looks decent and has a good design and maybe able to spray thicker materials than the graco. I also read somewhere (maybe here) that you can take off the gun that it comes with and put a pole gun on it like the big rig,? anyways any input...
  11. Drywall Texturing
    So I have 2 sprayers and want to sell my older one. Its a 1994 spray force 225 gallon, single tank. I have 175' of hose and a binks gun on it. Fresh coat of paint runs good and compressor is good. Just wondering what do you guys think my used value is for selling it.
  12. Drywall Tools, Supplies and Equipment
    Titan or Grayco for spraying primer etc:? John
  13. Drywall Texturing
    Hi my name is tina and I am doing this for my brother Vince...he owns his own texturing company here in Deland , FL...he has a 300 gal Desco that does knockdown & popcorn, 25 kohler engine and he bought it in 2006, wants out of beingin business for himself. Looking to sell this baby FAST!~...
  14. General Drywall Discussion
    I am looking into buying a Kodiak texture machine, and would like some input from anyone who knows this machine. I was told I could run 150' of hose and that I would need a air compressor that runs 10 to 15 CFM. I was told that it sprays like the big rigs. I am interested in this machine because...
  15. Drywall Texturing
    What kinds of sprayers have you guys tried? I started with a roller and hopper, went to Graco compact, then homemade on a 50 gallon drum, spray king 40 gal., tried a Kodiak, now own a 250 Gal AST trailer mount rig.
Top