Drywall Talk - Professional Drywall and Finishing Contractors Forum banner

sander

  1. Drywall Finishing
    jUST A POLL WHAT SANDER DO PEOPLE PREFER FOR CORNERS? THE FULL CIRCLE OR THE AERO WOOSTER SANDER?? which one?
  2. Drywall Tools, Supplies and Equipment
    going to try this out:blink: the flush sander might need to bend the bottom a little
  3. Business, Marketing, and Sales
    Hello, I just joined this site and am interested in finding more work. I have 12 years experience and am always looking to expand. 734-363-5956. Thanks.
  4. Drywall Finishing
    I do this all the time, but I figured out a little trick. Have your pole sander leaned up against a wall, and if you drop your sponge, grab your sander and put the paper side on the floor beside your sponge, nudge your sponge the back of the sander and balance it up, its quite easy to do it.:)
  5. Drywall Finishing
    I test ran a electric drywall sander from porter cable about 7-8 years ago, the thing was like trying to hang onto a rabid animal, was heavy, and even on the lowest setting, with 220grit, it left swirl marks no matter how gently I ran it. Everyone I talked to at the time had the same complaints...
  6. Drywall Finishing
    If i hook up a shop vac to my electric palm sander and run a hose from the exhaust out the window will this cut down on some time while sanding?
  7. Drywall Tools, Supplies and Equipment
    just wondering how heavy your Porta cable or Flex girrafes are. I think mine is abit to heavy
  8. General Drywall Discussion
    my flex sander is too stiff, when i sand 2.7 ceilings i have to use a bucket because the head of it wont really bend, any ideas? also when sanding i notice it always leaves light scuff marks i use a 220 grit yellow disk sand paper .
  9. Drywall Tools, Supplies and Equipment
    <img src="http://www.smilys.net/sheep/smiley3051.gif" alt="smiley3051.gif"><img src="http://www.smilys.net/sheep/smiley3051.gif" alt="smiley3051.gif"><img src="http://www.smilys.net/sheep/smiley3051.gif" alt="smiley3051.gif"><img src="http://www.smilys.net/sheep/smiley3051.gif" alt="smiley3051.gif">
  10. Drywall Finishing
    Porter Cable Drywall Sander - I think I'm gonna buy one.
  11. Drywall Tools, Supplies and Equipment
    I bought a radius 360 sander with the trigon attachment, the corners get bent fast then leave a line, and the foam is breaking up..They need to be more durable..Does anyone else have this problem....
  12. Drywall Tools, Supplies and Equipment
    Hey guys. So not to long ago i got the porter cable sander. And i am always getting crazy swirl marks, like a lot pf them and very noticble. Dont know what i can do differently. What grit paper u guys use? What speed you run at it?
  13. General Drywall Discussion
    Has anyone found a drywall sander that compares to the P-C 7800 that isn't as expensive. We don't use it everyday, but work it hard when we do use it. http://www.jjwpainting.com
  14. Drywall Tools, Supplies and Equipment
    Here you go, Lets pick this one apart then. I think it would be slow but maybe ok for small areas were dust control is needed. Here is a link with a clip and see the you tube clip below/ http://www.dustlesstechnologies.com/turbosander.htm
  15. Drywall Tools, Supplies and Equipment
    Last week i was curious about the black widow sander by trim tex so i send a mssg to joe to have some info about the product , he email me back right away and in 2 day , a rep will come on my job site to show me the sander ! That's what i call customer service ! Ill give you feedback about the...
  16. Drywall Tools, Supplies and Equipment
    At 2Bucks request, I'll start a thread on this puppy. I used it today briefly, to brush down some first coated metal and butts. It worked well for wide open stuff, not much different than the radius sanders, except you could get right up to the angle. The sanding pads are a little spendy (4...
  17. Drywall Finishing
    Has anyone heard of/ ever used this brand power sander? Looks like a PC knockoff, I just ordered one from Ebay for 250.00 brand new (with shipping). I have a PC but were needing another for the scope of work that we've been doing lately, (turd polishing) so I'm going to try out el cheapo and...
  18. Drywall Finishing
    Has anyone used the PC Drywall Sander (model # 7800)? I recently saw this on a job and I was quit impressed. It seems like it would be a lot easier to then hand sanding. Is the unit worth the cost? Does it hold up on the job site? I did notice that it was a great way to reduce the dust when...
Top