Please refresh my memory.
About 10 years ago I was working for a finishing company that required the finishers to install their own bead. I haven't seen it since and I think it would be prefect on the job Im on now.
It came in long boxes. We would cut it to length everyplace it was needed...
Just got my Blue Line corner bead roller this week, and its a really nice roller. The only down side was it is too narrow to work with USG B1 super wide bead. Being that's all that is stocked in my area I had to modify it slightly to work. All it took was adding a 1/4" spacer to move the roller...
i watch the video at columbia tool for adjust my corner finisher but what setting are the best ?(3 mud flow are available. ) my angle take 2 day to dry and i have a lot of fish eyes in my angle. what are the best 2.5 and 3.5 to finish or 3.5 to 2.5. ?
I was using the can-am corner mud applicator, and now either the wheels have worn down or something, because the middle of the head now leaves a black line and it seems as though the wheels have worn down...any input?
I ran backed over my sheetrock (green) corner bead hopper today and have to get a new one. I was happy with it. Is there anything better on the market????? If not I will get the same one again. It's been an expensive week! Know what I'm sayin?
why is more difficult to finish my angle with my columbia 3.5 than my 2.5. my blade need to be reset ? i'm not able to do my angle with the corner box the mud dosen't go on the wall, is more easy with the compound tube why ? the mudrunner are good product ? thx
I'm going to pick up some outside corner gear (roller, applicator) this week and was wonder if the Can Am applicator is any good or if the plastic ones are a must? I'm using the Can Am tube for the insides, but some say the outside app. is no good.
Sorry if this has been posted, can't seem to...
Ok guys I know the topic has been talked about some. For you guys who like to lap your edge with the second coat and use a 2 1/2 and then 3 1/2, is there anything wrong with using a 2 1/2 and then 3 or a 3 and 3 1/2 combination?
copy and paste into your address bar, it should take you right there.
I bought a corner roller (No Coat brand) off my boss which was virtually brand new.
After using it a few times i noticed that the rollers have a slight shampfer to them making it slightly less than a 90* angle for my corners.So when using my topcoat applicator head to finish them the...
Well the metal corner bead the homeowner had came in handy after all. I asked him to get some "shiny 90" as we call the metal angle and he got the heavier gauge that wont take screws. He had this metal corner bead so we put it to good use.
Hey guys, I think I'm wanting to switch from trim Tex glue on to t Tex mud on. Does anyone use their mud on bead? My other question is does anyone use those mud applicators that go on your corner box?
Is worth while getting 3 or 4 of those (outside offset, bullnose etc) or is is more...