Search Results for ‘bead’

Please refresh my memory. About 10 years ago I was working for a finishing company that required the finishers to install their own bead. I haven't seen it since and I think it would be prefect on the job Im on now. It came in long boxes. We would cut it to length everyplace it was needed...

So for using vinyl bead what kinda of mud do you guys use for your coats.

Just got my Blue Line corner bead roller this week, and its a really nice roller. The only down side was it is too narrow to work with USG B1 super wide bead. Being that's all that is stocked in my area I had to modify it slightly to work. All it took was adding a 1/4" spacer to move the roller...

Okay I have a question about stapling plastic bull nose bead. I have always either nailed or used 1" narrow crown staples or glued my plastic bull nose bead. I have also used probably 10 boxes of hydro bead. You know the stuff you spray with water and wait then stick to the corners. My...

Okay I have a question about stapling plastic bull nose bead. I have always either nailed or used 1" narrow crown staples or glued my plastic bull nose bead. I have also used probably 10 boxes of hydro bead. You know the stuff you spray with water and wait then stick to the corners. My...

Hello, I am looking for advice on a outside corner roller. I have it narrowed between the usg sheetrock or the columbia roller. Help

I ran backed over my sheetrock (green) corner bead hopper today and have to get a new one. I was happy with it. Is there anything better on the market????? If not I will get the same one again. It's been an expensive week! Know what I'm sayin?

Wondering what is your favorite off angle bead is... im with the No-Coat product..

We've been having a lot of interest in Australia with Trim-Tex's Rigid Adjustable Outside Bead that adjusts between 120 - 150 degrees and is also available in the Mud Set range and as an inside bead. Contractors see it as a great solution to irregular angles and poor framing as the bead flexes...

Anyone here use that Sheetrock brand green corner bead hopper???

Well the metal corner bead the homeowner had came in handy after all. I asked him to get some "shiny 90" as we call the metal angle and he got the heavier gauge that wont take screws. He had this metal corner bead so we put it to good use.

I have been experimenting woth the stop bead chamfer,bull, and 90 for some time laminating 5/8 and 1/2 has anyone else??

A number of times on DWT I have seen blokes post that metal bead always cracks unless you do strange things like put m**h down the edges. And I have wondered why that is. Then I recently seen the pics that Joe from Trim Tex uploaded comparing beads. When I seen the metal bead in the pic I then...

<P>I am new to the sight . I personally like the way paper finishes out if you have a hopper , but if not metal is the way.<IMG class=inlineimg border=0 alt=0 src="http://www.drywalltalk.com/images/smilies/smile.gif" smilieid="1"></P>

<a href="http://www.betterthanevertools.com/products.php?expandable=8&name=Red_Diamond_Outside_Applicator&category=Red_Diamond">http://www.betterthanevertools.com/products.php?expandable=8&name=Red_Diamond_Outside_Applicator&category=Red_Diamond</a><br><br> I'm thinking of how to modify my bead...

I just finished taping a basement suite where the face of one of the bulkhead is about half an inch out over the last 6' which is only really noticeable if you stand right under it at the other end. Now the contractor is asking me to build it out with mud, I told him he shouldn't have hired...

Doing some archways with flexible raduis bead. Whats the best way to install them? I tried using an air stapler but rockers F_cked me I went a used a laser to get them true but having a hell of a time getting ears to not flair out on me. Also is there an easy way to get perffect 45s with...

Is anyone using the certainteed aquatrim corner bead it would be nice to get rid of the hopper and roller any thoughts thanks