NovaCrown mouldings for Tapers/Beaders - Drywall Finishing - Drywall Talk

NovaCrown mouldings for Tapers/Beaders

 
Thread Tools Display Modes
Old 01-05-2018, 10:06 PM   #1
Junior Member
 
NovaCrown Mouldings's Avatar
 
Trade: Crown Moulding
Join Date: Jan 2018
Location: Abbotsford, BC
Posts: 1
Thanks: 0
Thanked 2 Times in 1 Post
Default

NovaCrown mouldings for Tapers/Beaders


Hello, this is Dave from NovaCrown and this is what we have to offer. We are new here and would like to introduce you to our awesome drywall product. www.youtube.com/watch?v=rQQdVIzC8SE

NovaCrown Mouldings is offline  
The Following 2 Users Say Thank You to NovaCrown Mouldings For This Useful Post:
cazna (01-08-2018), gazman (01-07-2018)
Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. DrywallTalk.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any construction or remodeling task!

Old 01-07-2018, 04:31 PM   #2
Senior DB Member
 
gazman's Avatar
 
Trade: Gyprocker
Join Date: Apr 2011
Location: Australia, N/E Victoria
Posts: 4,287
Thanks: 2,929
Thanked 3,491 Times in 1,762 Posts
Default

Re: NovaCrown mouldings for Tapers/Beaders


Thats a very interesting product. Here in Australia most homes use cornice (crown). Our product uses the same material as drywall for the core, and paper for the face. It is certainly much heavier than nova crown. May I suggest though that you have a look at the methods we use to install cornice. Aussies have been using the product for decades and I believe you could learn a lot by checking it out. Not meant to sound like a criticism, just thought you may find it of use.
gazman is offline  
The Following 2 Users Say Thank You to gazman For This Useful Post:
cazna (01-08-2018), MrWillys (01-08-2018)
Old 01-08-2018, 01:00 PM   #3
Senior Member
 
cazna's Avatar
 
Trade: Drywall and decorating
Join Date: Mar 2010
Location: New Zealand
Posts: 4,798
Thanks: 1,884
Thanked 2,980 Times in 1,593 Posts
Default

Re: NovaCrown mouldings for Tapers/Beaders


That product was in nz for a short time a few years back, The core was chunky polystyrene though, Not very nice to cut.

Thats a pretty awful slow way of installing though, Make a cornice head for the sizes needed and you can sell those too, then you just pop that on the tube and run two beads of mud, one on wall and one on ceiling and fit your product, Use same cornice mud for seams, Chalkings just a mess, people have limited skills with that, Most just make a mess and it doesnt sand very well.

Or just trowel load the edges, Like Gazman said, Been used in Aust and NZ for decades, You can install better than that.
Attached Thumbnails
NovaCrown mouldings for Tapers/Beaders-26230326_10155263654938549_1547141161937343656_n.jpg   NovaCrown mouldings for Tapers/Beaders-26734120_10155263654998549_6537923335202088770_n.jpg   NovaCrown mouldings for Tapers/Beaders-26169995_10155263655073549_5813183280672259758_n.jpg  

Last edited by cazna; 01-08-2018 at 01:10 PM.
cazna is offline  
The Following 3 Users Say Thank You to cazna For This Useful Post:
gazman (01-08-2018), MrWillys (01-08-2018), OtherbrotherMoore (01-16-2018)
Old 01-16-2018, 08:03 PM   #4
Member
 
OtherbrotherMoore's Avatar
 
Trade: Taper
Join Date: May 2017
Location: Shine Territory
Posts: 60
Thanks: 26
Thanked 25 Times in 16 Posts
Default

Re: NovaCrown mouldings for Tapers/Beaders


Quote:
Originally Posted by gazman View Post
Thats a very interesting product. Here in Australia most homes use cornice (crown). Our product uses the same material as drywall for the core, and paper for the face. It is certainly much heavier than nova crown. May I suggest though that you have a look at the methods we use to install cornice. Aussies have been using the product for decades and I believe you could learn a lot by checking it out. Not meant to sound like a criticism, just thought you may find it of use.
Those are my homies Gaz and Caz lending a hand
OtherbrotherMoore is offline  
The Following User Says Thank You to OtherbrotherMoore For This Useful Post:
gazman (01-20-2018)


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Join Now... It's Fast and FREE!

I am a professional contractor
I am a DIY Homeowner
Drywall Talk is for
PROFESSIONAL CONTRACTORS ONLY!

At DrywallTalk.com we cater exlusivly to professional contractors who make their living as a contractor. Knowing that many homeowners and DIYers are looking for a community to call home, we've created www.DIYChatroom.com DIY Chatroom is full of helpful advices and perfect for DIY homeowners.

Redirecing in 10 seconds
No Thanks
terms of service

Already Have an Account?

 

SEO by vBSEO 3.6.1